SUBER by Kolmer™
Increase energy efficiency by up to 20% while providing superior protection and appearance! Our coating is durable, flexible, and aesthetically beautiful. Suber by Kolmer is a breathable weather-water barrier & insulator in one envelope system. It will quickly protect and increase the value of your building while dramatically lowering construction, lifetime maintenance, & energy costs.
About
A patented exterior coating system manufactured from 96% high-grade raw cork and a proprietary highly adhesive water-based acrylic resin. It has superior thermal and acoustic insulated properties, is UV resistant, and impervious to wind-driven rain while maintaining healthy water-vapor transmission. This unique combination allows for optimal protection of the substrate while permitting natural curing to occur. Naturally, cork is deterrent to insects, mold or mildew growth, fire retardant, and is a 100% renewable natural resource.
SUBER by Kolmer™ has an extremely low thermal conductivity property, deterring heat and cold buildup, allowing the coating to remain comfortable to the touch in extreme environmental conditions. This attribute contributes significantly to an average of 15-25% energy savings.
Aesthetically, our system presents a consistent surface appearance with superior adhesion directly to substrates with minimal preparation. Unlike stucco, EIFS, and other rigid coatings, it is highly resistant to surface cracking due to its characteristic of remaining pliable and expandable.
SUBER by Kolmer™ is offered in a full range of integral, ultra UV resistant color choices, eliminating the need for post application field painting, thus reducing application labor expense and cycle time of project completion. If desired, the coating can be field painted as well.
Product Options
SUBER by Kolmer™ is available in four application formulations:
- Standard.
- Hi-Traffic (High Resistance).
- Waterproof.
- Fireproof.
The manufacturer carries ISO 9001 and ISO 14001 certifications.
Testing
Suber by Kolmer has been extensively tested in both European and US labs, along with over 14 years of actual field use. Additionally, we have testing on acoustical impact and fire resistance, available upon request. Following are test results specifically targeting substrate coating performance:
|
Property |
Method |
ICC ES |
Result |
|
Accelerated Weathering 2000 Hrs. |
ASTM G155 |
AC59 – Direct Applied Finish Systems |
Pass |
|
Freeze / Thaw |
AC59 5.2 |
AC59 – Direct Applied Finish Systems |
Pass |
|
Bond Strength |
AC59 5.2 |
AC59 – Direct Applied Finish Systems |
Pass |
|
Racking |
ASTM E72 |
AC59 – Direct Applied Finish Systems |
Pass |
|
Environmental Cycling |
AC59 5.4 |
AC59 – Direct Applied Finish Systems |
Pass |
|
Salt/Spray |
ASTM B117 |
AC59 – Direct Applied Finish Systems |
Pass |
|
Water Resistance |
ASTM D2247 |
AC59 – Direct Applied Finish Systems |
Pass |
|
Transverse Load |
ASTM E1233 |
AC212 – Water-Resistive Barriers |
Pass |
|
Racking |
ASTM E72 |
AC212 – Water-Resistive Barriers |
Pass |
|
Environmental Cycling |
AC212 4.7 |
AC212 – Water-Resistive Barriers |
Pass |
|
Water Penetration |
ASTM E331 |
AC212 – Water-Resistive Barriers |
Pass |
|
Thermal Conductance |
ASTM C518 |
|
0.648 k |
|
Pull-Off Adhesion |
ASTM D4541 |
|
215 psi |
|
Wind Driven Rain |
ASTM D6904 |
|
Pass |
|
Water Vapor Transmission |
ASTM E96 (A-Dry) |
|
1.88 |
|
Water Vapor Transmission |
ASTM E96 (B-Wet) |
|
14.48 |
|
Resistance to Fungi |
ASTM G21 |
|
0 |
* Testing conducted by PRI, accredited by the International Accreditation Service (IAS), a subsidiary of the International Code Council (ICC) as an ISO 17025 testing laboratory; by the Miami-Dade County Building Code Compliance Office as a testing laboratory; by the State of Florida Department of Community Affairs as a Product Testing Laboratory; and by the Cool Roof Rating Council as an Accredited Independent Testing Laboratory.
SUBER by Kolmer™ requires minimal surface preparation for most substrates, such as, but not limited to:SUBER by Kolmer™ requires minimal surface preparation for most substrates, such as, but not limited to:
- Wall sheathing over wood or metal framing.
- Concrete masonry.
- Tilt-up concrete panels.
- Metal roofing and siding.
- Interior Ceiling/Floor.
A two-coat spray application is recommended. Hand, palette knife, or trowel applications are alternative installation methods.
Full drying time is 8 hours to 48 hours depending on substrate and application purpose.
Note:
- Allow initial coat to fully dry prior to additional application.
- Insure substrate should be dry, stable, and free from dirt.
- Application temperature should be between 38° and 86° F. Storage should be between 38° and 90° F.
Manufacturer’s standard 10 year material warranty, when applied according to manufacturer’s installation guidelines by a certified applicator. See manufacturer’s warranty for complete details.
Technical
| VOC | Maximum | 19 g/l |
| Spread Rate | Approx. | 20 (ft2 per gal) |
| Solid Content | Approx. | 45% |
| Weight | Approx. | 7.6 (lbs./gal.) |
| Thickness | Approx.(Dry) | 120 mils / 3 mm |
SUBER by Kolmer™is a “green product.” It has a low VOC content and is completely free of formaldehyde and similar potential toxins. The installed material actually provides a negative carbon footprint, is 100% recyclable, and qualifies for LEED credits. It is an ideal coating, due to energy savings qualities, for self-sustaining building projects. Potential LEED credit contributors include:
- MR Credit 4 Recycled Content.
- MR Credit 6 Rapidly Renewable Materials.
- IEQ Credit 4.2 Low-Emitting Materials.
- ID Credit 1 Innovation in Design.
Select the item you would like to download and view: